Request Catalogue
Downlights

LDI3 Range

Miniature Downlights

The LDI3/18 is a small and very discreet LED light pod with an injection moulded thermally conductive plastic body acting as a very effective heat sink and incorporating an 18mm thread and lock nut for simple installation. (NB: Requires 18.5mm clearance hole with access to the rear).

The LDI3/18 light pods (white or black front bezel) offer two distribution types. For emergency lighting applications the LDI3/18 light pods incorporate an integral green/red bi-colour indicator suitable for standard emergency or Self-Test/DALI emergency.

LDI3/18/W (‘WIDE’ BEAM)
The LDI3/18/W light pod offers 105 degree wide angle lens configuration ideal for illumination of open areas with mounting heights below 3.5m.

LDI3/18/C (‘CORRIDOR’ BEAM)
The LDI3/18/C light pod offers a dissymmetric lens providing a narrow beam across the width of a corridor and extremely wide (batwing) distribution along the length of the corridor.

Datasheet
LDT Files
CE Declaration of Conformity
UKCA Declaration of Conformity
LDI3-3
LDI3-4
LDI3-2
LDI3-5

MANUAL TEST OPTION

LDCK/425 – NON-MAINTAINED 350mA MINIATURE KIT

Driver/charger module and 2.4Volt (2-cell) 3Ah C NiCd battery pack for 3 hour operation of 3Watt LED light pods. Battery is connected by a PCB mounted plug.

Module dimensions: 130mm (L) x 28mm (W) x 21mm (H) Battery dimensions Single stick @ 100mm (L) x 25mm(dia.)

 

SELF-TEST/DALI OPTIONS LM NON-MAINTAINED KIT

LM NON-MAINTAINED KIT (available with 350mA or 700mA outputs)

Driver/charger module and appropriate ‘plug-in’ battery supplied in a protective tube providing 3 hour emergency operation of 3 Watt LED light pods with automatic self-test or fully interoperable DALI when connected to a suitable DALI system.

Module dimensions: 178mm (L) x 30mm (W) x 21mm (H)

Battery dimensions: 350mA – NiCd 2 cell stick @ 130mm (L) x 24mm(dia.), 700mA – LiFePO₄ 2 cell stick @ 134mm (L) x 23mm(dia.)

 

MAINS/CENTRAL POWER SUPPLY OPTIONS

LDPSU230 MAINS VOLTAGE DRIVERS

350mA, 500mA and 700mA driver options available on request

Note: Suitable for 110Volt AC/DC and up to 230Volt supplies

Have a question about a product or specification? Drop us a note…

Have a question about a product or specification? Drop us a note…

Other Downlights

Access
Self-contained LED Downlight
See More
AccessIP
Self-contained IP65 rated LED Downlight
See More
Access Track
Self-contained Emergency Downlight
See More
LDSM
Self-contained Emergency Downlight
See More

Other Products

Bulkheads

Signage

Commercial

Amenity

Emergency Downlights

Twin Floods

Conversion Kits

SurePath Testing

Central Power

Sensors

Register to download
our product catalogue

Contact

Trust

John from Middlesex says, “We contacted ELP to help troubleshoot a bespoke problem we came up against during an installation.  Not only were they able to provide us with a quick, knowledgeable solution, but they had the exact product we needed delivered to us the next day.”

Sanjit from London says, “I care about the longevity of every product I have installed in my projects.  ELP delivers high-quality emergency lighting equipment at reasonable costs.  I would highly recommend them for long-term savings.”

Dave in Edinburgh says, “If you are looking for emergency lighting products then you need to speak to these guys.  The safety of our end users is of paramount importance, and we know that ELP care as much about this as they do our custom.”

Rely on us to help you

Contact us
Facebook Twitter Linkedin Instagram

Contact

Parbrook House
Gillmans Industrial Estate
Natts Lane
Billingshurst
West Sussex RH14 9EZ

Tel: +44 (0)1403 786601
Fax: +44 (0)1403 786602
Email: sales@elp.uk.com

Products

About us

Services

© 2021 Emergency Lighting Products Ltd. All Rights Reserved.

Privacy Policy | Terms & Conditions | Cookies Policy